Daewoo Nexia

Since 1994 of release

Repair and car operation

Дэу the Nexia
+ The maintenance instruction
+ Maintenance service
- The engine
   2.1. Technical characteristics
   2.2. Greasing system
   2.3. Maintenance service and engine repair
   2.4. Compression check
   2.5. Dismantle and engine installation in gathering
   2.6. Engine support
   2.7. An inlet collector and a lining
   2.8. A final collector and a lining
   2.9. A cover of the case of a cam-shaft
   2.10. A pulley of a cranked shaft
   2.11. A forward cover of a gear belt
   2.12. A camshaft cogwheel
   2.13. A cogwheel of a cranked shaft
   2.14. A back cover of a gear belt
   2.15. Adjustment of a tension of a gear belt
   2.16. Check of angular position of a camshaft
   2.17. Forward consolidation of a cranked shaft
   2.18. A camshaft. Levers. Hydrojacks of backlashes
   2.19. Klapannye springs. Consolidations of cores of valves
   2.20. A head of cylinders. The camshaft case
   2.21. Repair of a head of the block of cylinders
   2.22. Dismantle of valves
   2.23. Directing plugs of valves
   2.24. Expansion of apertures of plugs
   2.25. Valves
   2.26. Klapannye springs
   2.27. Saddles of valves
   2.28. Consolidations of valves
   2.29. Height of a core of the valve concerning a head of the block of cylinders
   + 2.30. Pushers of valves with hydrojacks of backlashes
   2.31. The oil pallet
   2.32. A reception branch pipe with the oil filter
   2.33. The oil pump
   2.34. Repair of the oil pump
   2.35. Pistons and rods
   2.36. A flywheel. Back consolidation of a cranked shaft
   2.37. A cranked shaft
   2.38. Rods and radical bearings
   2.39. Replacement of loose leaves
   2.40. Piston group and rods
   2.41. Piston fingers and rings
   2.42. The block of cylinders
   2.43. Installation of pistons
   2.44. Balancing of a disk with a gear wreath
   2.45. Repair of carving apertures
   + 2.46. Diagnostics of malfunctions of the engine
+ 3. The engine (two top camshafts)
+ Cooling system
+ Топлевная and exhaust systems
+ Electric chain
+ 7. Ignition system
+ 8. The electronic block of management and gauges
+ Transmission
+ 10. A five-speed transmission and the main transfer RPO MM5
+ 11. Automatic Transmission
+ Steering
+ Running gear
+ 14. A forward suspension bracket
+ 15. A drive of forward wheels
+ 16. A back suspension bracket
+ Brake system
+ Body
+ Heating, ventilation
+ Electric equipment

2.33. The oil pump

THE GENERAL DATA

The oil pump

1. THE PUMP CASE
2. THE STOPPER
3. CONSOLIDATION
4. THE LEADING GEAR WHEEL
5. THE CONDUCTED GEAR WHEEL
6. THE COVER
7. The Mb SCREW
8. THE LINING 9. THE PLUG
10. THE VALVE DRAIN
11. THE BOLT
12. THE RING
13. THE VALVE SPRING
14. ПЛУНЖЕР
15. THE BOLT WITH THE WASHER

The oil pump

AND. THE SWITCH OF THE SIGNALLING DEVICE OF PRESSURE DROP OF OIL

137. THE OIL PUMP
148. BOLTS OF FASTENING OF THE PUMP

To remove or disconnect

PERFORMANCE ORDER

1. A cogwheel 141.

2. A back cover of a gear belt.

3. The switch of a signalling device of pressure drop of oil And.

4. The oil pallet 125.

5. The oil filter 107.

6. A reception branch pipe 130 and the oil pump 137.

7. Forward consolidation.

To establish or attach

PERFORMANCE ORDER

1. The oil pump 137 with a new lining 149.

2. A reception branch pipe 130 with new consolidation 131.

3. The oil pallet 125.

4. New forward consolidation.

5. The new oil filter 107.

6. The switch of a signalling device of pressure drop of oil And.

7. A back cover of a gear belt.

8. A cogwheel 141.

QX4.ONLINE
S40.ONLINE
A-8.ONLINE
W124.ONLINE
RX300.ONLINE
W140.ONLINE
B3-B4.SPACE
B3B4.SPACE
A-8.SPACE