Daewoo Nexia

Since 1994 of release

Repair and car operation



Дэу the Nexia
+ The maintenance instruction
+ Maintenance service
+ The engine
+ 3. The engine (two top camshafts)
+ Cooling system
+ Топлевная and exhaust systems
+ Electric chain
+ 7. Ignition system
+ 8. The electronic block of management and gauges
+ Transmission
+ 10. A five-speed transmission and the main transfer RPO MM5
+ 11. Automatic Transmission
+ Steering
+ Running gear
+ 14. A forward suspension bracket
+ 15. A drive of forward wheels
+ 16. A back suspension bracket
- Brake system
   17.2. The general description
   17.3. Check of a technical condition of brake system
   17.4. Filling of a tank of the main brake cylinder
   17.5. Removal of air from brake system
   17.6. Washing of brake system
   17.7. Check of a regulator of brake forces
   17.8. Brake hoses (lobbies)
   17.9. Brake hoses (back)
   + 17.10. A lay brake
   17.11. Check of a condition of forward brake overlays
   17.12. Check of a condition of back brake overlays
   17.13. Brake disks
   17.14. Brake drums
   17.15. A brake pedal
   17.16. The main brake cylinder
   17.17. A tank
   17.18. Regulators of brake forces (proportional valves)
   17.19. The main brake cylinder in gathering
   17.20. Repair of the main brake cylinder
   17.21. The disk brake mechanism
   17.22. Колодки and overlays
   17.23. A protective cover of the piston
   17.24. A brake disk
   17.25. A support
   17.26. A guard
   17.27. Support repair
   17.28. The drum-type brake mechanism
   17.29. Adjustment of the brake mechanism
   17.30. Adjustment of a lay brake
   17.31. A basic brake disk
   17.32. The wheel cylinder
   17.33. Repair of the wheel cylinder
   17.34. The vacuum amplifier of brakes
   + 17.35. Antiblocking system of brakes
   17.36. Removal of air from a brake hydraulic drive
   17.37. Removal of air from a brake hydraulic drive manually
   17.38. The valve for removal of air from the block of modulators
   17.39. Electromagnetic valves of modulators
   17.40. The block of hydraulic modulators with electric motors
   17.41. The electronic block of management of braking
   17.42. The gauge of angular speed of a forward wheel
   17.43. Flexible conducting ДУС of a forward wheel
   17.44. The gauge of angular speed of a back wheel
   + 17.45. Flexible conducting ДУС of a back wheel
   17.46. A system electric safety lock
   17.47. Relay ABS
   17.48. Signalling devices
+ Body
+ Heating, ventilation
+ Electric equipment






Brake system

17. Brake system

17.1. Technical characteristics
THE GENERAL DATA

Brake drum

Internal diameter
198,6 mm
Admissible ovality
0,1 mm
The maximum diameter at расточке
201,0 mm

Brake disk

External diameter
236,0 mm
Admissible face palpation
0,1 mm
Admissible разнотолщинность
0,01 mm
Nominal thickness
12,7 mm
The minimum admissible thickness after grinding
10,7 мм*
The minimum admissible thickness
9,7 mm

* At achievement of the specified size of a disk unitary installation new brake колодок is supposed only. Then the disk is subject to replacement.

The main brake cylinder

Nominal diameter of the cylinder
22,20 mm
The maximum admissible diameter of the cylinder
22,27 mm

The wheel brake cylinder

Nominal diameter of the cylinder
17,46 mm
The maximum admissible diameter of the cylinder
17,53 mm
The minimum admissible diameter of the piston
17,39 mm

The moments of an inhaling of carving connections

Bolt of fastening of flexible conducting ДУС of a back wheel
5,4 Nanometers
Bolt of fastening ДУС of a back wheel
7,8 Nanometers
Bolt of fastening ДУС of a forward wheel
7,8 Nanometers
Bolt of fastening of the wheel cylinder
9 Nanometers
Bolt of fastening of a tip of a brake hose to скобе
25 Nanometers
Bolt of fastening of a tip of a brake hose
25 Nanometers
Bolt of fastening of relay ABS
8 Nanometers
Bolt of an arm brake скобы
80 Nanometers
Bolt of the lever of a lay brake
25 Nanometers
Bolts (with a head of type of Togh) fastenings of the block of electric motors
4,5 Nanometers
Bolts of fastening of the block of modulators
5,4 Nanometers
Bolts of fastening of a brake basic disk
28 Nanometers
Bolts with heads of type of Togh of fastening ЭМК
4,5 Nanometers
Bolts of a guard of the disk brake mechanism
4 Nanometers
The screw of fastening of a brake drum to a nave flange
4 Nanometers
The screw of fastening of a brake disk to a nave flange
4 Nanometers
Nut of fastening of a vacuum hose to the inlet pipeline of the engine
5 Nanometers
Nut of fastening of a vacuum hose to the inlet pipeline of the engine
15 Nanometers
Nut of fastening of an axis of a brake pedal
18 Nanometers
Nuts of fastening of the main brake cylinder
18 Nanometers
Nuts of fastening of the main brake cylinder to the amplifier
18 Nanometers
Nuts of fastening of an arm of a pedal to the forward panel
20 Nanometers
Nuts of fastening of an arm with the amplifier to the forward panel of the Body
22 Nanometers
Nuts of fastening of cover ТЭБУ
6 Nanometers
Nuts of fastening ТЭБУ
4 Nanometers
Nuts of fastening of the amplifier to an arm
22 Nanometers
Nuts of fastening of gear wheels of modulators
8,5 Nanometers
The valve of release of air
9 Nanometers
Valves for removal of air from a hydrodrive (on supports and wheel cylinders)
9 Nanometers
The plug of fastening of a negative wire of the battery
15 Nanometers
Fixing bolts of a support
95 Nanometers
Fixing bolts of a support of the disk brake mechanism
95 Nanometers
Seat fastening
20 Nanometers
Hollow bolt of fastening of a tip of a brake hose to a support of a disk brake
25 Nanometers
Hollow bolt of a support of a disk brake
25 Nanometers
The proportional valve
20 – 25 Nanometers
Connections of brake pipelines
16 Nanometers
Special bolts of fastening of the proportional valve
24 Nanometers
Coupling bolts of a support
95 Nanometers
Coupling bolts of a brake support
95 Nanometers
Shtutsernye nuts of fastening of brake pipelines
15 Nanometers
Unions of pipelines
16 Nanometers