Daewoo Nexia

Since 1994 of release

Repair and car operation

18.18. Cowl loops

THE GENERAL DATA

Cowl loops

1. THE PANEL OF THE VENTILATING LATTICE 2. THE COWL LOOP 3. THE NUT (ONE ON EACH LOOP) 4. THE WASHER 5. THE BOLT (ONE ON EACH LOOP)

To remove or disconnect

PERFORMANCE ORDER

1. To lift a cowl and to establish an emphasis. 2. To close forward wings and a windscreen sheetings, to avoid cases of damages of a paint and varnish covering and glass at dismantle and cowl installation. 3. To note position of loops concerning a cowl for simplification of the subsequent installation 4. To turn out two screws of fastening of each party of a cowl. 5. To remove by means of the second mechanic a cowl from the car. 6. To turn away a nut and to remove a bolt of fastening of each loop. 7. To remove loops from the car.

To establish or attach

PERFORMANCE ORDER

1. Loops on a car Body. To insert a bolt and to screw a nut of fastening of each loop. To tighten nuts of fastening of loops of a cowl the moment of 8 Nanometers. 2. By means of the second mechanic to establish and adjust cowl position on preliminary made labels. 3. To screw in on two screws of fastening of a cowl to everyone loops. 4. To check up correctness of adjustment of position of a cowl. And запорный the cowl mechanism it is necessary to grease loops periodically.