Дэу the Nexia
+ The maintenance instruction
+ Maintenance service
+ The engine
+ 3. The engine (two top camshafts)
+ Cooling system
+ Топлевная and exhaust systems
+ Electric chain
+ 7. Ignition system
+ 8. The electronic block of management and gauges
- Transmission
9.2. The general description
9.3. Diagnostics of malfunctions
9.4. A cable of a drive of coupling
9.5. A coupling pedal
9.6. Conducted and press disks, a coupling drive
9.7. Removal of air from a hydraulic drive of coupling
9.8. The main cylinder
9.9. The working cylinder of coupling
9.10. The basic malfunctions of coupling, their reason and ways of elimination
+ 10. A five-speed transmission and the main transfer RPO MM5
+ 11. Automatic Transmission
+ Steering
+ Running gear
+ 14. A forward suspension bracket
+ 15. A drive of forward wheels
+ 16. A back suspension bracket
+ Brake system
+ Body
+ Heating, ventilation
+ Electric equipment
|
The main cylinder of coupling
15. THE PIPELINE
16. THE MAIN CYLINDER
17. THE COPPER WASHER
18. THE HOSE UNION
19. THE SPRING COLLAR
20. THE TANK
21. THE HOSE |
50. THE PISTON IN GATHERING
55. THE NUT
57. THE ROD
58. THE COUNTERNUT
61. THE PERSISTENT RING
62. THE CLAMP OF THE PERSISTENT RING
63. THE COVER |
Dismantle of a clamp of a persistent ring m the main cylinder
Dismantle of the main cylinder of coupling
|
|
15. THE PIPELINE
16. THE MAIN CYLINDER
19. THE SPRING COLLAR
20. THE TANK
55. THE NUT
57. THE ROD |
To remove or disconnect
| PERFORMANCE ORDER |
| 1. Before a detachment of a hose from the public cylinder it is necessary to pump out a brake liquid from a tank. |
| 2. To remove a spring collar 19 and to disconnect a hose 21 from the main cylinder. |
| 3. By means of a wrench to turn out the union of the pipeline 15 of the case of the secret cylinder. |
| 4. To disconnect a rod 57 main cylinders from a coupling pedal. Before it it is necessary to remove a returnable spring 27, a clip 26 and to take out a finger 25. |
| 5. To turn out two bolts of fastening of the main cylinder and to remove it in a direction of a motor compartment. |
|
To disassemble
| PERFORMANCE ORDER |
| 1. To remove a cover and to take out a clamp of a persistent ring (to use nippers a stripper). |
| 2. To take out a rod and the piston 50 in gathering. |
|
To check up
| PERFORMANCE ORDER |
1. A condition of an internal surface of the main cylinder and the piston (presence of wear tracks or defects).
The prevention Before dismantle from the car it is necessary to check up functioning of the main cylinder. If the cylinder works abnormally or work accompanies it ся peep, it is necessary to replace the main cylinder in gathering.
|
| 2. To check up a condition of a sealing cuff (presence of wear tracks or defects) and its landing in a piston flute. At deterioration or cuff damage the working liquid will follow from the cylinder. |
| 3. To check up a rod condition. It is necessary to replace the worn out or defective rod. |
|
To collect
| PERFORMANCE ORDER |
| 1. To grease with a fresh brake liquid an internal surface of the eye cylinder and a sealing cuff. |
| 2. To insert into the cylinder the piston 50 in gathering. |
| 3. To put on a rod a persistent ring. |
|
To establish or attach
| PERFORMANCE ORDER |
| 1. To establish the main cylinder into place. To wrap fixing bolts and a counternut 58. |
| 2. By means of a wrench вдернуть in the main cylinder the union of the pipeline 15. |
| 3. To attach to the main cylinder a hose 21 and to fix its collar 19. |
4. To insert a finger 25, to fix its clip 26, then to connect a rod to a pedal of coupling 30. To establish a returnable spring 27.
The prevention Before assemblage to grease консистентной with greasing connect тельные rod and pedal details.
|
| 5. To remove air from a coupling hydrodrive, to adjust a course of a pedal and to finish level of a working liquid in a tank to norm. |
|
|
|