Daewoo Nexia

Since 1994 of release

Repair and car operation



Дэу the Nexia
+ The maintenance instruction
+ Maintenance service
+ The engine
+ 3. The engine (two top camshafts)
+ Cooling system
+ Топлевная and exhaust systems
+ Electric chain
+ 7. Ignition system
+ 8. The electronic block of management and gauges
- Transmission
   9.2. The general description
   9.3. Diagnostics of malfunctions
   9.4. A cable of a drive of coupling
   9.5. A coupling pedal
   9.6. Conducted and press disks, a coupling drive
   9.7. Removal of air from a hydraulic drive of coupling
   9.8. The main cylinder
   9.9. The working cylinder of coupling
   9.10. The basic malfunctions of coupling, their reason and ways of elimination
+ 10. A five-speed transmission and the main transfer RPO MM5
+ 11. Automatic Transmission
+ Steering
+ Running gear
+ 14. A forward suspension bracket
+ 15. A drive of forward wheels
+ 16. A back suspension bracket
+ Brake system
+ Body
+ Heating, ventilation
+ Electric equipment






9.4. A cable of a drive of coupling
THE GENERAL DATA

Measurement of length of a free tip of a cable

2. THE CLIP
3. THE CABLE TIP
4. THE NUT

Fastening of a tip of a cable to the lever of deenergizing of coupling

2. THE CLIP
3. THE CABLE TIP
4. THE NUT

Fastening of a pedal of coupling

7. ШПЛИНТ
8. THE NUT
9. THE WASHER
11. THE AXIS
12. THE RETURNABLE SPRING

Cable fastening to a coupling pedal

3. HAKOHEЧНИK THE CABLE
12. THE RETURNABLE SPRING
14. THE PEDAL

To remove or disconnect

PERFORMANCE ORDER
1. A negative wire of the storage battery.
2. To measure cвободную length of a carving tip of a cable. To write down result of measurement for use in the course of preliminary adjustment of a new cable.
3. A tip of a cable 3 from the lever of the platen of 1 deenergizing of coupling.
3а. To remove a clip 2.
3б. To turn away a nut 4.
4. The switch of blocking of start of the engine.
5. A coupling pedal.
5а. A returnable spring 12 from a kerchief 10.
5б. Шплинт 7.
5в. A nut 8.
5г. A washer 9.
5д. An axis 11.
5е. A pedal 14.
6. A returnable spring 12 and a tip of a cable from a pedal 14.
7. A drive cable, having extended it from a motor compartment.

To establish or attach

PERFORMANCE ORDER
1. A drive cable to insert from motor отгона through a forward board of the Body.
2. To put on a tip of a cable the plug 5 and a washer 6.
3. To attach a tip of a cable and a returnable spring 12 to a pedal 14.
4. To establish a pedal 14 between kerchiefs 10.
5. To insert into apertures of kerchiefs 10 and pedals 14 axis 1.
5а. Before installation to grease an axis консистентной with greasing with designation N1052349.
5б. To put on a washer 9.
5в. To screw a nut 8.
5г. To insert шплинт 7.
5д. To insert a returnable spring 12 into a kerchief 10.
6. The switch of blocking of start of the engine.
7. A tip 3 cables to the lever of the platen of 1 deenergizing of coupling.
8. To screw a nut 4 in position with which it occupied before cable dismantle.
9. To adjust a drive cable.
10. A clip 2.
11. A negative wire of the battery.

To adjust

Measurement of distance from a pedal of coupling to a steering wheel


 


PERFORMANCE ORDER
1. To measure distance from the middle of an overlay of a pedal of coupling to a steering wheel rim. To write down result of measurement.
2. Completely to press a coupling pedal. Repeatedly to measure distance from the middle of an overlay of a pedal of coupling to a steering wheel rim. To write down result of measurement.
3. To subtract the first result of measurement from the second and to define a course of a pedal of coupling.
The nominal size of a course of a pedal of coupling makes 138–146 mm.
If the actual size of a course of a pedal oversteps the bounds of the specified range it is necessary to remove a clip 2 and by means of rotation of a nut 4 in this or that party to adjust length of a cable and size of a course of a pedal.
After adjustment to establish into place a clip 2.
The prevention

At correct adjustment of a course the coupling pedal should settle down above a brake pedal. The free wheeling of a pedal of coupling should be absent.

In process of deterioration of overlays of a conducted disk the coupling pedal rises above.