Дэу the Nexia
+ The maintenance instruction
+ Maintenance service
+ The engine
+ 3. The engine (two top camshafts)
+ Cooling system
+ Топлевная and exhaust systems
+ Electric chain
+ 7. Ignition system
+ 8. The electronic block of management and gauges
- Transmission
9.2. The general description
9.3. Diagnostics of malfunctions
9.4. A cable of a drive of coupling
9.5. A coupling pedal
9.6. Conducted and press disks, a coupling drive
9.7. Removal of air from a hydraulic drive of coupling
9.8. The main cylinder
9.9. The working cylinder of coupling
9.10. The basic malfunctions of coupling, their reason and ways of elimination
+ 10. A five-speed transmission and the main transfer RPO MM5
+ 11. Automatic Transmission
+ Steering
+ Running gear
+ 14. A forward suspension bracket
+ 15. A drive of forward wheels
+ 16. A back suspension bracket
+ Brake system
+ Body
+ Heating, ventilation
+ Electric equipment
|
Coupling is not switched off (at completely pressed pedal of coupling, the transmission lever does not move freely to position or from position of the included transfer of a backing)
|
THE POSSIBLE REASONS
|
WAY OF ELIMINATION
|
|
Infringement of normal work of a drive of couplings
|
To eliminate malfunctions
|
|
Low speed of a pedal of coupling
|
To adjust тросовый a drive
|
|
Presence люфтов in drive connections
|
To eliminate malfunctions or to replace the worn out details
|
|
Breakage of a conducted disk
|
To replace a conducted disk
|
|
Wrong installation of the platen with a plug
|
To dismantle the platen and to establish anew. Slightly to grease консистентной with greasing for wheel bearings the ends of levers of a plug and spring petals
|
|
Jamming in шлицевом connection of a nave of a conducted disk with primary shaft
|
To repair or replace a conducted disk
|
|
Коробление or a bend of a conducted disk
|
To replace a conducted disk
|
Probuksovyvanie couplings
|
THE POSSIBLE REASONS
|
WAY OF ELIMINATION
|
|
Infringement of normal work of a drive of coupling
|
To eliminate malfunctions
|
|
Замасливание frictional overlays of a conducted disk
|
To eliminate подтекание oils and to replace a conducted disk
|
|
Deterioration or separation of frictional overlays from a conducted disk
|
To replace a conducted disk
|
|
Коробление a press disk or a flywheel
|
To replace press a disk or a flywheel
|
|
Easing of a press spring
|
To replace диафрагменную a spring
|
|
The conducted disk is not earned extra
|
To earn extra overlays of a conducted disk smooth троганием the car from a place 30 – 40 times. Not to overheat a coupling detail
|
|
Overheat of a conducted disk
|
To cool coupling
|
Shvatyvanie couplings
|
THE POSSIBLE REASONS
|
WAY OF ELIMINATION
|
|
Замасливание surfaces of a friction of disks. Подгорание or formation of a varnish touch on frictional overlays
|
To eliminate leaks of oil and to replace a conducted disk of coupling
|
|
Deterioration шлицев a primary shaft
|
To replace a primary shaft
|
|
Коробление a press disk or a flywheel
|
To replace press a disk or a flywheel
|
|
Pollution of surfaces of a friction смолоподобными substances
|
To clear superficial pollution. To replace the burnt slightly details
|
Jingle or knock at inclusion of transfers
|
THE POSSIBLE REASONS
|
WAY OF ELIMINATION
|
|
Easing of by-pass springs
|
To replace press a disk
|
|
Люфт in plug fastening
|
To dismantle and establish anew
|
|
Замасливание frictional overlays демпфера a conducted disk
|
To eliminate leaks of oil and to replace a conducted disk of coupling
|
|
Breakage of springs демпфера a conducted disk
|
To replace a conducted disk
|
Noise выжимного the bearing at completely included coupling
|
THE POSSIBLE REASONS
|
WAY OF ELIMINATION
|
|
Infringement of normal work of a drive of coupling
|
To eliminate malfunctions
|
|
Jamming выжимного the bearing
|
To clear of pollution, to grease, check up on presence of agnails, jags and other defects
|
|
Wrong installation of the platen with the lever
|
To dismantle the platen with the lever and to establish anew
|
|
Easing of a returnable spring of a pedal
|
To replace a returnable spring
|
Noise выжимного the bearing at completely included coupling
|
THE POSSIBLE REASONS
|
WAY OF ELIMINATION
|
|
Infringement of normal work of a drive of coupling
|
To eliminate malfunctions
|
|
Jamming выжимного the bearing
|
To clear of pollution, to grease, check up on presence of agnails, jags and other defects
|
|
Wrong installation of the platen with the lever
|
To dismantle the platen with the lever and to establish anew
|
|
Easing of a returnable spring of a pedal
|
To replace a returnable spring
|
The raised noise
|
THE POSSIBLE REASONS
|
WAY OF ELIMINATION
|
|
Deterioration выжимного the bearing
|
To replace выжимной the bearing
|
|
Wrong installation of the platen with the lever
|
To dismantle the platen with the lever and to establish anew. Slightly to grease консистентной with greasing for wheel bearings the ends of levers the plugs contacting with выжимным by the bearing
|
Nevozvrashchenie pedals of coupling in a starting position after it отпускания
|
THE POSSIBLE REASONS
|
WAY OF ELIMINATION
|
|
Jamming of a drive or выжимного the bearing
|
To grease and eliminate jamming of a drive and выжимного the bearing
|
|
Easing of elastic plates of a press disk
|
To replace press a disk
|
The big effort to coupling pedals
|
THE POSSIBLE REASONS
|
WAY OF ELIMINATION
|
|
Jamming of a drive of coupling
|
To grease and eliminate drive jamming
|
|
Deterioration of a conducted disk
|
To replace a conducted disk
|
|
Deterioration of a cable
|
To replace a drive cable
|
|
|