Daewoo Nexia

Since 1994 of release

Repair and car operation

17.33. Repair of the wheel cylinder

THE GENERAL DATA

The wheel cylinder

301. THE PROTECTIVE COVER 302. THE PISTON 303. CONSOLIDATION 304. РАЗЖИМНАЯ THE SPRING 305. THE VALVE CAP 306. THE VALVE FOR AIR REMOVAL 307. THE WHEEL CYLINDER

To disassemble

PERFORMANCE ORDER

1. To dismantle the wheel cylinder 307 from a basic disk. 2. Protective covers 301. 3. Pistons 302 and consolidations 303. 4. A razzhimnuju spring 304. 5. A cap 305 and the valve 306 for air removal.

To check up

PERFORMANCE ORDER

1. A mirror of the wheel cylinder and pistons 302 on presence:      – Scratches;      – Dents;      – Corrosion traces;      – Wear tracks. 2. To remove by means of soft безворсовой fabrics easy traces of corrosion from a cylinder mirror. If it is not possible to remove corrosion traces, to replace the wheel cylinder.

To clear

PERFORMANCE ORDER

1. To wash out all details spirit or a fresh brake liquid. 2. To dry up details a stream of the compressed air which is not containing oils. 3. Before assemblage to grease a cylinder mirror, pistons, consolidations by a fresh brake liquid.

To collect

---

The prevention

Before assemblage to apply a thin film pastes for brake cylinders on a mirror of the cylinder and all new rubber details (except protective covers).

---

PERFORMANCE ORDER

1. To screw the valve 306 and to put on a cap 305. 2. To insert a spring 304. 3. Consolidations 303 and pistons 302. 4. Protective covers 301. 5. To check up free moving of pistons 302 in the cylinder. 6. To fix the wheel cylinder on a brake basic disk 4.