Daewoo Nexia

Since 1994 of release

Repair and car operation

Дэу the Nexia
+ The maintenance instruction
+ Maintenance service
+ The engine
+ 3. The engine (two top camshafts)
+ Cooling system
+ Топлевная and exhaust systems
+ Electric chain
- 7. Ignition system
   7.2. Diagnostics of malfunctions of a spark plug
   7.3. The ignition distributor
   7.4. The ignition coil
   7.5. Repair of the distributor of ignition
   7.6. System of regulation of an advancing of ignition
   7.7. Installation of the moment of ignition
+ 8. The electronic block of management and gauges
+ Transmission
+ 10. A five-speed transmission and the main transfer RPO MM5
+ 11. Automatic Transmission
+ Steering
+ Running gear
+ 14. A forward suspension bracket
+ 15. A drive of forward wheels
+ 16. A back suspension bracket
+ Brake system
+ Body
+ Heating, ventilation
+ Electric equipment

7.7. Installation of the moment of ignition

THE GENERAL DATA

Labels for installation of an initial corner of an advancing of ignition

AND. THE LABEL ON THE PULLEY OF THE CRANKED SHAFT
CENTURY THE INDEX ON THE BACK COVER OF THE GEAR BELT

The prevention
ЭБУ does not define absolute value of a corner of an advancing of ignition. He counts only correction of the rather originally established (base) value of a corner of an advancing of ignition. For this reason wrong initial installation of the moment of ignition leads to the general displacement of the moments of ignition on all power setting.

Check and installation of an initial corner of an advancing of ignition is made as follows:

PERFORMANCE ORDER

1. To start and warm up the Engine idling to normal working temperature.

2. To switch off the Engine and to connect among themselves plugs And and In a diagnostic socket.

3. To check up installation of an advancing of ignition by means of a stroboscope connected to a wire of a high voltage of a candle of the first cylinder.