|
Daewoo NexiaSince 1994 of releaseRepair and car operation |
|
Дэу the Nexia + The maintenance instruction + Maintenance service + The engine + 3. The engine (two top camshafts) + Cooling system + Топлевная and exhaust systems - Electric chain 6.2. The general description 6.3. Rules of care of the accumulator 6.4. Accumulator check 6.5. Accumulator gymnastics 6.6. The storage battery 6.7. System of start-up of the engine 6.8. Diagnostics of malfunctions 6.9. Algorithm of diagnostics of malfunctions 6.10. The traction relay 6.11. Муфта a free wheeling (МСХ) 6.12. Repair of knots of a starter 5МТ and 10МТ 6.13. The generator 6.14. Diagnostics of malfunctions of generator CS-121 6.15. Generator dismantle 6.16. Generator CS-130 repair + 7. Ignition system + 8. The electronic block of management and gauges + Transmission + 10. A five-speed transmission and the main transfer RPO MM5 + 11. Automatic Transmission + Steering + Running gear + 14. A forward suspension bracket + 15. A drive of forward wheels + 16. A back suspension bracket + Brake system + Body + Heating, ventilation + Electric equipment |
6.3. Rules of care of the accumulator
If you are going to keep working capacity of the battery throughout as much as possible long period of time, observe following rules: – At the idle engine switch off those all electric devices in the car; – Accumulator gymnastics make a current making exactly 0,1 from nominal capacity. For example, the accumulator in capacity 50 А/ч is necessary for charging a current force 5 And, at the unscrewed stoppers of jellied apertures; Operation of the discharged battery, especially is not supposed in the winter. In the discharged accumulator the water percent in electrolit is too high. The electrolit can freeze and put out of action the accumulator case. Do not try to charge the frozen accumulator the big current or to get the car from an extraneous source. Allow to the accumulator to thaw, and then try to restore it by gymnastics a current of small force, and it still can serve. Crack in bank of the served accumulator – not always the reason of its replacement. Pour out electrolit, dry up and wash out gasoline a crack then process its file. The sawdust formed at cutting of a crack, mix with эпоксидным glue or шпатлевкой. With the received structure carefully cover a crack. After the given procedure of electrolits fill in not earlier than in 24 hours. |
![]()
|