Daewoo Nexia

Since 1994 of release

Repair and car operation



Дэу the Nexia
+ The maintenance instruction
+ Maintenance service
+ The engine
+ 3. The engine (two top camshafts)
+ Cooling system
- Топлевная and exhaust systems
   5.2. System of injection of fuel
   5.3. Modes of functioning of system
   - 5.4. The basic knots of system
      5.4.1. A fuel tank, the pump and pipelines
      5.4.2. The distributive fuel pipeline
      5.4.3. Fuel atomizers
      5.4.4. A regulator of pressure of fuel
      + 5.4.5. The case throttle заслонки
      5.4.6. The relay of pressure of oil
      5.4.7. The relay of inclusion of the fuel pump
      5.4.8. Check of giving of the fuel pump
      5.4.9. A fuel tank
      5.4.10. An accelerator pedal
      5.4.11. The fuel filter
      5.4.12. The fuel pump
      5.4.13. Dump of pressure of fuel in system
      5.4.14. The distributive fuel pipeline
      5.4.15. Fuel atomizers
      5.4.16. A regulator of pressure of fuel
      5.4.17. The case throttle заслонки
      5.4.18. The gauge of position throttle заслонки (ДДЗ)
      5.4.19. The idling valve (КХХ)
      5.4.20. Replacement of the case throttle заслонки
      5.4.21. System of compulsory ventilation картера (СПВК)
      5.4.22. Check of functioning of the valve of ventilation картера (КВК)
      5.4.23. System of release of the fulfilled gases
      5.4.24. Katalitichesky neutralizer
      5.4.25. A reception exhaust pipe and каталитический neutralizer
      5.4.26. The forward muffler with an intermediate exhaust pipe
      5.4.27. The back muffler with an exhaust pipe
+ Electric chain
+ 7. Ignition system
+ 8. The electronic block of management and gauges
+ Transmission
+ 10. A five-speed transmission and the main transfer RPO MM5
+ 11. Automatic Transmission
+ Steering
+ Running gear
+ 14. A forward suspension bracket
+ 15. A drive of forward wheels
+ 16. A back suspension bracket
+ Brake system
+ Body
+ Heating, ventilation
+ Electric equipment






5.4.4. A regulator of pressure of fuel
THE GENERAL DATA

Regulator of pressure of fuel

1. THE VACUUM PIPELINE
2. THE SEALING RING
3. THE REGULATOR CASE
4. THE UNION OF THE DRAIN PIPELINE
5. THE SEALING RING OF THE UNION
6. THE DIAPHRAGM
7. THE PRESS SPRING
8. THE COVER OF THE VACUUM CAVITY OF THE REGULATOR

The regulator of pressure of fuel includes редукционный the valve with a press spring and диафрагменным a sensitive element, fig. the Regulator of pressure of fuel. The diaphragm divides two cavities of a regulator: fuel and vacuum. The vacuum cavity is connected by the pipeline to an inlet collector of the engine. In a vacuum cavity the press spring of a regulator is located also. Regulator function is maintenance of the set stable pressure of the fuel arriving to atomizers, and updating of this pressure depending on engine loading. At reduction разряжения in an inlet collector, pressure of fuel in system increases. The regulator of pressure of fuel is established on the end of the distributive pipeline and is not subject to repair in operation.

At the working engine the regulator supports pressure of fuel in system in a range 284–225 кПа.

If pressure leaves for the bottom border, normal work двигате ля is broken and ЭБУ establishes a code of malfunction 44. At an elevated pressure of fuel more than 325 кПа there is a strong smell of the fulfilled gases and the code of malfunction 45 is established.