Since 1994 of release
Repair and car operation
Дэу the Nexia
- The maintenance instruction
- Combination of devices
The index of temperature of a cooling liquid
Summarising and daily counters of the passed way
The index of level of fuel
Control lamps and switches
Switches and switches
Switches and the salon equipment
The salon and Body equipment
Ventilation, heating and salon air-conditioning
+ Car maintenance service
+ Maintenance service
+ The engine
+ 3. The engine (two top camshafts)
+ Cooling system
+ Топлевная and exhaust systems
+ Electric chain
+ 7. Ignition system
+ 8. The electronic block of management and gauges
+ 10. A five-speed transmission and the main transfer RPO MM5
+ 11. Automatic Transmission
+ Running gear
+ 14. A forward suspension bracket
+ 15. A drive of forward wheels
+ 16. A back suspension bracket
+ Brake system
+ Heating, ventilation
+ Electric equipment
Control lamp of a minimum level of fuel
Inclusion of a control lamp testifies that all stock of fuel will be spent. The lamp lights up, when in a tank remains about 7,5 l of fuel.
Control lamp of level of a liquid стеклоомывателя
The control lamp lights up, when in a tank стеклоомывателя there is not enough liquid. At inclusion of a control lamp add a liquid in a tank.
Control lamp of malfunction of systems of the engine
The control lamp lights up at inclusion of ignition and continues to burn in a starter operating time. The control lamp dies away at once after engine start.
Inclusion of a control lamp at the working engine testifies to malfunction presence in engine systems Thus the electronic block of engine management passes in emergency operation of work which allows to continue movement. For malfunction elimination address in the service centre.
It is not necessary to maintain the car for an appreciable length of time at the included control lamp as it can lead to increase in the expense of fuel, decrease in tjagovo-dynamic properties of the car and serious malfunctions of the engine. Short-term inclusions of a control lamp are the normal phenomenon and are not connected with occurrence of refusals in engine systems.
The control lamp lights up at inclusion of a lay brake (ignition is included).
Before троганием the car be convinced that the lay brake is switched off completely. Thus the control lamp should go out. If the control lamp continues to burn and after full deenergizing of a lay brake, it can specify in dangerous falling of level of a brake liquid in a tank of brake system.
Control lamp of inclusion of a headlight of headlights
The control lamp lights up at inclusion of a headlight of headlights.
Control lamp of pressure of oil in the engine
The control lamp lights up at ignition inclusion (it is provided for the control of serviceability of a lamp) and should go out after engine start.
If the control lamp has lighted up during car movement, it specifies in dangerous pressure drop in system of greasing of the engine. In this case it is necessary to stop the car and to switch off the Engine Check up oil level in the engine. At normal level of oil it is necessary to address in the nearest service centre for check of system of greasing.
Control lamp of malfunction of the generator
Inclusion of a control lamp testifies to the category of the storage battery.
The control lamp lights up at inclusion of ignition for the control of serviceability of a lamp and should die away after engine start.
If the control lamp has lighted up at car movement, execute the following:
– Curtail on a roadside of road and stop;
If a belt will pull normally malfunction has arisen in the generator or in a pressure regulator. It is necessary to find and eliminate immediately malfunction, having addressed in the service centre.
Control lamp of inclusion of indexes of turn and the emergency light alarm system
The control lamp blinks at inclusion of indexes of turn or the emergency light alarm system. The speeded up blinking of a lamp specifies in malfunction of lamps of indexes of turn.
Control lamp of an open door
The control lamp burns, if one of doors is opened or not completely closed.
Control lamp of not fastened seat belt
The control lamp burns at the included ignition (the ignition key will turn in position II) until the seat belt of the driver will not be fastened.
Besides, at ignition key turn position II joins a warning sound signal if a seat belt of the driver will not fasten. The signal sounds 4–8 with.
There are three positions of the handle.
POSITION OFF: external illumination is switched off.