|
|
Daewoo NexiaSince 1994 of releaseRepair and car operation |
|
|
Дэу the Nexia + The maintenance instruction - Maintenance service 1.2. The general instructions on repair 1.2. Identification number of the car 1.3. Car lifting 1.4. Car maintenance service - 1.5. Control surveys and the servicing, spent by the owner 1.5.1. At car driving 1.5.2. At each refuelling of fuel 1.5.3. Monthly Maintenance service 1.5.4. The maintenance service, spent two times a year 1.5.5. At each replacement of engine oil 1.5.6. Annual Maintenance service 1.6. The moments of an inhaling of carving connections 1.7. Characteristics of the car with system of multidot injection of fuel 1.8. Characteristics of cars (2 top camshafts of the engine) 1.9. The sizes and weight of cars + The engine + 3. The engine (two top camshafts) + Cooling system + Топлевная and exhaust systems + Electric chain + 7. Ignition system + 8. The electronic block of management and gauges + Transmission + 10. A five-speed transmission and the main transfer RPO MM5 + 11. Automatic Transmission + Steering + Running gear + 14. A forward suspension bracket + 15. A drive of forward wheels + 16. A back suspension bracket + Brake system + Body + Heating, ventilation + Electric equipment |
1.5.2. At each refuelling of fuel
Leaks of any operational liquids (except a liquid of a washer of a windscreen) testify also presence enough serious malfunctions in systems and car units. At once eliminate all reasons of the found out leaks of operational liquids. Oil level in the engine Check up level of engine oil and if necessary finish it to norm. Is better to supervise engine oil level on the heated-up engine. After a stop of the engine wait some minutes that oil has merged in the pallet. Then check up level of oil by means of oil щупа. Wipe dry a core щупа and insert it against the stop into place. Then again take out oil щуп and check oil level. Oil level should be in a working zone with an inscription "Operating Range". If necessary add oil in the Engine and finish level of oil to norm. Do not fill in superfluous oil as it can put the Engine out of action. After definition of level of oil insert oil щуп into place. If the control of level of oil is made on the cold engine, do not start the Engine before check of level of oil. Otherwise results of gauging will not correspond to true level of oil as cold dense oil flows down in the pallet slowly enough. Level and condition of a cooling liquid Check up level of a cooling liquid in a broad tank and if necessary finish it to norm. At pollution of a liquid or occurrence of rusty colour replace cooling liquid. Level of a liquid of a washer of a windscreen Check up liquid level in a tank of a washer and if necessary finish it to norm. |
|