Daewoo Nexia

Since 1994 of release

Repair and car operation

Дэу the Nexia
+ The maintenance instruction
+ Maintenance service
+ The engine
+ 3. The engine (two top camshafts)
+ Cooling system
+ Топлевная and exhaust systems
+ Electric chain
+ 7. Ignition system
+ 8. The electronic block of management and gauges
+ Transmission
+ 10. A five-speed transmission and the main transfer RPO MM5
+ 11. Automatic Transmission
+ Steering
+ Running gear
+ 14. A forward suspension bracket
+ 15. A drive of forward wheels
+ 16. A back suspension bracket
+ Brake system
- Body
   18.2. Identification and use of keys
   18.3. Pasted lateral молдинги
   18.4. Diagnostics and repair негерметичности Bodies
   18.5. Anticorrosive processing
   + 18.6. Dismantle of consolidations of wind and back glasses
   + 18.7. A windscreen
   + 18.8. Back glass (the Body a sedan)
   18.9. Glass of a back door (the Body a hatch-back)
   18.10. Triangular lateral glass
   + 18.11. Elimination негерметичности consolidations
   + 18.12. A rear-view mirror
   + 18.13. An electroheater of back glass
   - 18.14. Bumpers
      + 18.14.1. A forward bumper
      18.14.2. A back bumper
   18.15. An external ventilating lattice
   18.16. The switch of a forward door
   18.17. A cowl
   18.18. Cowl loops
   18.19. A cowl emphasis
   18.20. The zapornoe device of a cowl
   18.21. A safety latch of a cowl
   18.22. A cable of a latch of a cowl
   18.23. A radiator lattice
   18.24. A forward wing
   + 18.25. Panels of an upholstery of doors
   + 18.26. The equipment of doors (forward and back doors)
   + 18.27. Door-locks
   + 18.28. Glasses of doors
   18.29. External rear-view mirrors
   18.30. Dismantle and installation of forward and back doors
   + 18.31. Back panels of an upholstery (the Body a hatch-back)
   + 18.32. Upholstery panels (the Body a sedan)
   18.33. The external panel
   18.34. Вентиляционнай the valve (the Body a hatch-back)
   18.35. Лючок mouths of a fuel tank
   + 18.36. Opening window leaves (the Body a hatch-back)
   + 18.37. A back shelf (the Body a sedan)
   18.38. A luggage space cover (the Body a hatch-back)
   18.39. An overlay of a back wall of a luggage carrier (the Body a sedan)
   + 18.40. A luggage carrier cover (the Body a sedan)
   18.41. The back combined lantern
   + 18.42. A back door (the Body a hatch-back)
   18.43. A roof
   18.44. The ceiling panel
   18.45. Protivosolnechnye peaks
   18.46. A plafond of internal illumination
   + 18.47. Panels and the salon equipment
   18.48. External longitudinal overlays of a roof
   + 18.49. The ventilating hatch
   + 18.50. Forward seats
   + 18.51. A back seat
+ Heating, ventilation
+ Electric equipment

18.14.2. A back bumper

THE GENERAL DATA

Back bumper

1. DECORATIVE SHINING МОЛДИНГ THE BACK BUMPER
2. THE EXTERNAL CASING OF THE BACK BUMPER 3. CELLULAR THE POWER ABSORBER
4. ПРОТИВОУДАРНЫИ THE BAR OF THE BACK BUMPER
5. FIXING PLATES OF THE BACK BUMPER

To remove or disconnect

PERFORMANCE ORDER

1. A negative wire of the storage battery.

2. To turn out 2 fixing screws of an external casing of a bumper from отбортовки back wheel niches.

3. To turn out 2 fixing bolts of the external casing which heads are in back wheel niches.

4. Fixing details of a rug of a luggage space. To turn away a rug forward, to open a back part полика a luggage space.

5. From a luggage space to turn on 4 top fixing nuts of a bumper (on two from each party) and to remove washers.

6. From under a bumper to turn on 4 bottom fixing nuts (on two from each party) and to remove washers.

7. To disconnect electroconducting from lanterns illumination of licence plate and backing lanterns.

8. To remove a bumper from the car.
The prevention
To disconnect an external casing of a back bumper from a cellular power absorber, it is necessary to dismantle 6 bottom clamps.

To establish or attach

PERFORMANCE ORDER

1. Electroconducting to lanterns of illumination of licence plate and backing lanterns. To establish on the places fixing details of a bumper.

2. To wrap 4 bottom nuts (on two from each party), having established preliminary washers. Access to fixing details – from under a bumper.

3. To turn 4 top, nuts (on two from each party), having established preliminary washers. Access to fixing details – from a luggage space. To tighten nuts of fastening of a back bumper the moment of 27 Nanometers.

4. To wrap two bolts of fastening of an external casing of a back bumper (from back wheel niches). To tighten bolts of fastening of an external casing of a back bumper the moment of 20 Nanometers.

5. To screw two screws (on one from each party) in отбортовку back wheel niches. To spread into place a luggage space rug.

6. To fix a luggage space rug.

7. A negative wire of the storage battery.