Daewoo Nexia

Since 1994 of release

Repair and car operation


Дэу the Nexia
+ The maintenance instruction
+ Maintenance service
+ The engine
+ 3. The engine (two top camshafts)
+ Cooling system
+ Топлевная and exhaust systems
+ Electric chain
+ 7. Ignition system
+ 8. The electronic block of management and gauges
+ Transmission
+ 10. A five-speed transmission and the main transfer RPO MM5
+ 11. Automatic Transmission
+ Steering
+ Running gear
- 14. A forward suspension bracket
   14.2. The general description
   14.3. Check of size of forces of a friction in a suspension bracket
   14.4. Condition check подшипниковых support and spherical hinges
   14.5. The stabilizer
   14.6. A rack in gathering with подшипниковой a support
   14.7. The bottom lever
   14.8. The spherical hinge
   14.9. A nave and the wheel bearing
   14.10. The top support
   14.11. Springs
   14.12. The shock-absorber
   14.13. Plugs of hinges of the bottom lever
+ 15. A drive of forward wheels
+ 16. A back suspension bracket
+ Brake system
+ Body
+ Heating, ventilation
+ Electric equipment






14.2. The general description
THE GENERAL DATA

The device of a forward suspension bracket

1. THE SPRING CLAMP
2. КОРОНЧАТАЯ THE NUT
3. THE BOLT
4. THE COLLAR OF FASTENING OF THE BOTTOM LEVER
5. IT IS FREE
6. THE SPHERICAL HINGE
7. IT IS FREE
8. THE BOLT
9. THE WASHER
10. THE RUBBER PLUG
11. THE BOLT
12. THE WASHER
13. THE BOTTOM LEVER
14. THE PLUG OF THE BACK SUPPORT OF THE LEVER
15. THE PLUG OF THE FORWARD SUPPORT OF THE LEVER
16. THE WASHER
17. THE NUT
18. THE RUBBER PLUG
19. THE WASHER
20. РАСПОРНАЯ THE PLUG
21. THE WASHER
22. THE RUBBER PLUG
23. IT IS FREE
24. THE RUBBER PLUG
25. THE COLLAR
26. THE RUBBER PLUG OF THE STABILIZER
27. THE STABILIZER
28. THE RUBBER PLUG
29. THE WASHER
30. THE NUT
31. THE SCREW COVER OF THE RACK 		32. THE TELESCOPIC SHOCK-ABSORBER
33. THE RACK WITH ПОДШИПНИКОВОЙ THE SUPPORT (THE ROTARY FIST)
34. THE WASHER PERSISTENT
35. THE NUT OF THE ROD OF THE SHOCK-ABSORBER
36. THE PROTECTIVE COVER OF THE TOP SUPPORT
37. THE NUT
38. THE WASHER
39. TOP (ПОДШИПНИКОВАЯ) THE RACK SUPPORT
40. ТАРЕЛЬЧАТАЯ THE WASHER (WITH THE EDGE UNBENT UPWARDS)
41. THE SUPPORT (PLASTIC)
42. THE PROTECTIVE CASING OF THE RACK
43. THE TOP LINING OF THE SPRING
44. THE SPRING
45. THE COMPRESSION BUFFER
46. THE BOTTOM LINING OF THE SPRING
47. THE GUARD OF THE DISK BRAKE
48. THE SPRING RING
49. THE WHEEL BEARING
50. THE SPRING RING
51. THE NAVE
52. THE BRAKE DISK
53. THE WASHER
54. ШПЛИНТ
55. SEMIAXIS NUTS
56. THE ADJUSTING SCREW
57. СКОБА THE DISK BRAKE
58. THE SCREW
59. THE WASHER

On the car the independent rychazhno-telescopic suspension bracket with spring elastic elements is established. The suspension bracket consists of the bottom levers, telescopic racks with shock-absorbers, springs, the top support and the stabilizer. In hinges of the bottom levers rubber plugs are used. The top support of a telescopic rack is supplied rubber демпфиру ющим by an element and the persistent bearing for possibility of turn of forward wheels. Telescopic racks bear подшипниковые support of wheels which шарнирно are connected with the bottom levers of a suspension bracket spherical hinges. Shafts of spherical fingers are inserted into apertures подшипниковых support and fixed by nuts. Cases of spherical hinges приклепаны to the bottom levers. At carrying out of servicing of a suspension bracket the definitive inhaling of fixing bolts of support of the bottom lever and стабилизато ра should be made only in such position of details of a suspension bracket which corresponds to static loading of the car. The suspension bracket occupies static position at опирании the equipped car on an equal and horizontal platform.