Дэу the Nexia
+ The maintenance instruction
+ Maintenance service
+ The engine
+ 3. The engine (two top camshafts)
+ Cooling system
+ Топлевная and exhaust systems
+ Electric chain
+ 7. Ignition system
+ 8. The electronic block of management and gauges
+ Transmission
+ 10. A five-speed transmission and the main transfer RPO MM5
+ 11. Automatic Transmission
- Steering
12.2. The general description
12.3. The reechnyj steering mechanism in gathering
12.4. Tips of steering draughts
12.5. Steering draughts
12.6. A casing картера the steering mechanism
12.7. Муфта a steering shaft
12.8. A sealing cover of an aperture of a forward board of the Body
12.9. Плунжер рейки
12.10. The Shaft-gear wheel
12.11. Рейка
12.12. The needle bearing
12.13. The directing plug рейки
12.14. Check of neutral position рейки
12.15. Recommendations about replacement of consolidations in the hydraulic booster
12.16. Check of level and having added a working liquid
12.17. Removal of air from hydrosystem
12.18. The steering mechanism with the hydraulic booster in gathering
12.19. Hoses and pipelines
12.20. A tank
12.21. Tips of steering draughts
12.22. Steering draughts
12.23. Plugs of hinges of steering draughts
12.24. Муфта a steering shaft
12.25. A sealing cover
12.26. Hydrocylinder pipelines
12.27. Adjustment of a preliminary tightness of a spring плунжера
12.28. Consolidations of a shaft of the hydrodistributor and the top bearing
12.29. The steering mechanism
12.30. Check of neutral position рейки
12.31. A belt of a drive of the pump
12.32. A pulley of a drive of the pump
12.33. The pump in gathering
12.34. Control levers on a steering column
12.35. A steering wheel
12.36. The ignition lock
12.37. A steering column
12.38. Lever the switch, a steering shaft, a steering column (noncontrollable)
12.39. Lever the switch, a steering shaft, a steering column (regulated)
+ Running gear
+ 14. A forward suspension bracket
+ 15. A drive of forward wheels
+ 16. A back suspension bracket
+ Brake system
+ Body
+ Heating, ventilation
+ Electric equipment
|
Tip of steering draught
|
|
AND. IDENTICAL DISTANCES
CENTURY THE ROTARY LEVER OF THE RACK OF THE SUSPENSION BRACKET
30. THE ADJUSTING SCREW
31. THE TIP OF STEERING DRAUGHT (LEFT)
33. THE NUT
34. THE COUPLING BOLT
35. STEERING DRAUGHT (LEFT) |
To remove or disconnect
| PERFORMANCE ORDER |
| 1. To turn away a nut of a spherical finger. |
| 2. To weaken an inhaling of bolts 34. |
| 3. By means of stripper КМ-507В to disconnect a tip 31 or 41 with a spherical finger from the corresponding rotary lever of a rack of a forward suspension bracket. |
| 4. To remove a tip 31 or 41 from the adjusting screw 30. |
|
To establish or attach
| PERFORMANCE ORDER |
| 1. To screw a tip 31 or 41 on the adjusting screw 30. |
| 2. To attach a spherical finger of a tip to the rotary lever. |
| 3. To screw a nut 33 on a spherical finger. To tighten a nut of a spherical finger of steering draught the moment of 60-75 Nanometers. |
|
To adjust
| PERFORMANCE ORDER |
| 1. To adjust a convergence of forward wheels, rotation of the adjusting screw 30. |
| 2. To tighten a bolt клеммового connections of steering draught by the moment of 22 Nanometers. |
|
|
|