Daewoo Nexia

Since 1994 of release

Repair and car operation



Дэу the Nexia
+ The maintenance instruction
+ Maintenance service
+ The engine
+ 3. The engine (two top camshafts)
+ Cooling system
+ Топлевная and exhaust systems
+ Electric chain
+ 7. Ignition system
+ 8. The electronic block of management and gauges
+ Transmission
+ 10. A five-speed transmission and the main transfer RPO MM5
+ 11. Automatic Transmission
- Steering
   12.2. The general description
   12.3. The reechnyj steering mechanism in gathering
   12.4. Tips of steering draughts
   12.5. Steering draughts
   12.6. A casing картера the steering mechanism
   12.7. Муфта a steering shaft
   12.8. A sealing cover of an aperture of a forward board of the Body
   12.9. Плунжер рейки
   12.10. The Shaft-gear wheel
   12.11. Рейка
   12.12. The needle bearing
   12.13. The directing plug рейки
   12.14. Check of neutral position рейки
   12.15. Recommendations about replacement of consolidations in the hydraulic booster
   12.16. Check of level and having added a working liquid
   12.17. Removal of air from hydrosystem
   12.18. The steering mechanism with the hydraulic booster in gathering
   12.19. Hoses and pipelines
   12.20. A tank
   12.21. Tips of steering draughts
   12.22. Steering draughts
   12.23. Plugs of hinges of steering draughts
   12.24. Муфта a steering shaft
   12.25. A sealing cover
   12.26. Hydrocylinder pipelines
   12.27. Adjustment of a preliminary tightness of a spring плунжера
   12.28. Consolidations of a shaft of the hydrodistributor and the top bearing
   12.29. The steering mechanism
   12.30. Check of neutral position рейки
   12.31. A belt of a drive of the pump
   12.32. A pulley of a drive of the pump
   12.33. The pump in gathering
   12.34. Control levers on a steering column
   12.35. A steering wheel
   12.36. The ignition lock
   12.37. A steering column
   12.38. Lever the switch, a steering shaft, a steering column (noncontrollable)
   12.39. Lever the switch, a steering shaft, a steering column (regulated)
+ Running gear
+ 14. A forward suspension bracket
+ 15. A drive of forward wheels
+ 16. A back suspension bracket
+ Brake system
+ Body
+ Heating, ventilation
+ Electric equipment






12.18. The steering mechanism with the hydraulic booster in gathering
THE GENERAL DATA

The reechnyj steering mechanism with the hydraulic amplifier

1. COUPLING BOLT МУФТЫ
2. МУФТА
3. The SEALING COVER of the APERTURE of the FORWARD BOARD of the Body
4. THE SPRING RING
5. CONSOLIDATION (ПЫЛЬНИК), THE SHAFT. GEAR WHEELS
6. INTERNAL CONSOLIDATION OF THE SHAFT OF THE GEAR WHEEL
7. THE BEARING IN THE PLUG
8. SEALING RINGS OF THE SLEEVE OF THE DISTRIBUTOR
9. THE SPRING RING
10. THE DISTRIBUTOR IN GATHERING
11. SHAFT-GEAR WHEEL CONSOLIDATION
12. THE TOP PLUG OF THE SHAFT-GEAR WHEEL
13. THE SEALING RING
14. ПЛУНЖЕР
15. THE SEALING RING
16. THE COUNTERNUT
17. THE ADJUSTING STOPPER
18. THE SPRING
19. ЗАГЛУШКА CARTER (LEFT)
20. THE RUBBER ASSEMBLY PLUG
21. THE NUT
22. THE BEARING IN GATHERING
23. THE SPRING RING
24. THE COVER
25. GEAR РЕЙКА
26. THE CASING COLLAR
27. THE CASING PLUG
28. GO PLANCK РЕЙКИ
29. THE WASHER 30. THE ADJUSTING SCREW
31. THE TIP OF STEERING DRAUGHT (LEFT)
32. THE SEALING COVER
33. THE NUT
34. THE COUPLING BOLT
35. STEERING DRAUGHT (LEFT)
36. THE PLUG OF THE HINGE OF STEERING DRAUGHT
37. THE FIXING PLATE
38. THE BOLT
39. THE BASIC PLATE
40. STEERING DRAUGHT (RIGHT)
41. THE TIP OF STEERING DRAUGHT (RIGHT)
42. THE CASING COLLAR
43. THE CASING PLUG
44. CARTER'S CASING
45. THE WASHER
46. ROD CONSOLIDATION.
47. THE PISTON
48. THE SEALING RING
49. THE NUT
50. THE RUBBER ASSEMBLY PLUG
51. THE CYLINDER
52. THE SEALING RING OF THE PISTON
53. THE SEALING RING
54. THE DIRECTING PLUG OF THE ROD
55. CARTER OF THE STEERING MECHANISM
56. THE PIPELINE (TURN TO THE LEFT)
57. THE PIPELINE (TURN TO THE RIGHT)

Муфта a steering shaft

1. COUPLING BOLT МУФТЫ
2. МУФТА THE STEERING SHAFT IN GATHERING

Fastening of the steering mechanism

44. CARTER'S CASING
58. THE COLLAR

Fastening of internal hinges of steering draughts

35. STEERING DRAUGHT (LEFT)
37. THE FIXING PLATE
38. THE BOLT
39. THE BASIC PLATE
40. STEERING DRAUGHT (RIGHT)
44. CARTER'S CASING

To remove or disconnect

PERFORMANCE ORDER
1. A negative wire of the battery.
2. An air cleaner.
3. To disconnect both steering draughts 35 and 40, preliminary having removed fixing plate 37. The plate 37 is not subject to a reuse.
4. To disconnect both arms демпфера from картера the steering mechanism.
5. Демпфер a steering.
6. To turn away coupling bolts клеммовых connections муфты a steering shaft.
7. To pull together elastic муфту upwards on a steering shaft.
8. To disconnect from the distributor case delivery and drain pipelines.
9. To take out the steering mechanism from an aperture of the forward panel of the Body.
To remove from the steering mechanism aperture consolidation in the forward panel of the Body.
10. To take out the steering mechanism through an aperture of a niche of the right wheel.
The prevention

If hairpins have been dismantled together with assembly collars, it is necessary to screw hairpins into place and to tighten the demanded moment.



To establish or attach

PERFORMANCE ORDER
1. The steering mechanism in gathering through an aperture hiss the right wheel.
2. Consolidation of a forward board of the Body on картер the steering mechanism.
3. To shift рейку in the average position corresponding to rectilinear movement of the car, and to establish both assembly collars of fastening картера to a forward board of the Body. To screw самоконтрящиеся nuts.
The prevention

Steering wheel spokes should be symmetrized concerning a vertical and to be directed downwards.


4. To tighten nuts of fastening of collars картера the steering mechanism the moment of 22 Nanometers.
5. To attach both steering bent for рейке.
The prevention

To use washers between a head of draught and a directing lath. To use only a new fixing plate.


6. To tighten bolts of fastening of steering draughts the moment of 90 Nanometers.
7. Демпфер a steering. To attach to картеру the mechanism both arms демпфера. To tighten fastening bolts демпфера a steering the moment of 22 Nanometers.
8. To lower муфту on a shaft-shes shaft терни and to tighten the bottom coupling bolt муфты. To tighten a coupling bolt муфты a steering shaft the moment of 22 Nanometers.
9. To extend upwards against the stop a steering shaft and to tighten the top coupling bolt муфты. To tighten a coupling bolt муфты a steering shaft the moment of 22 Nanometers.
10. To check up, that рейка the steering mechanism remained on the average position.
11. To attach a negative wire of the battery.
12. To attach to corresponding apertures картера delivery and drain pipelines. To tighten nuts of unions of pipelines the moment of 27 Nanometers.
13. An air cleaner.