Daewoo Nexia

Since 1994 of release

Repair and car operation



Дэу the Nexia
+ The maintenance instruction
+ Maintenance service
+ The engine
+ 3. The engine (two top camshafts)
+ Cooling system
+ Топлевная and exhaust systems
+ Electric chain
+ 7. Ignition system
+ 8. The electronic block of management and gauges
+ Transmission
+ 10. A five-speed transmission and the main transfer RPO MM5
+ 11. Automatic Transmission
- Steering
   12.2. The general description
   12.3. The reechnyj steering mechanism in gathering
   12.4. Tips of steering draughts
   12.5. Steering draughts
   12.6. A casing картера the steering mechanism
   12.7. Муфта a steering shaft
   12.8. A sealing cover of an aperture of a forward board of the Body
   12.9. Плунжер рейки
   12.10. The Shaft-gear wheel
   12.11. Рейка
   12.12. The needle bearing
   12.13. The directing plug рейки
   12.14. Check of neutral position рейки
   12.15. Recommendations about replacement of consolidations in the hydraulic booster
   12.16. Check of level and having added a working liquid
   12.17. Removal of air from hydrosystem
   12.18. The steering mechanism with the hydraulic booster in gathering
   12.19. Hoses and pipelines
   12.20. A tank
   12.21. Tips of steering draughts
   12.22. Steering draughts
   12.23. Plugs of hinges of steering draughts
   12.24. Муфта a steering shaft
   12.25. A sealing cover
   12.26. Hydrocylinder pipelines
   12.27. Adjustment of a preliminary tightness of a spring плунжера
   12.28. Consolidations of a shaft of the hydrodistributor and the top bearing
   12.29. The steering mechanism
   12.30. Check of neutral position рейки
   12.31. A belt of a drive of the pump
   12.32. A pulley of a drive of the pump
   12.33. The pump in gathering
   12.34. Control levers on a steering column
   12.35. A steering wheel
   12.36. The ignition lock
   12.37. A steering column
   12.38. Lever the switch, a steering shaft, a steering column (noncontrollable)
   12.39. Lever the switch, a steering shaft, a steering column (regulated)
+ Running gear
+ 14. A forward suspension bracket
+ 15. A drive of forward wheels
+ 16. A back suspension bracket
+ Brake system
+ Body
+ Heating, ventilation
+ Electric equipment






12.17. Removal of air from hydrosystem
THE GENERAL DATA

For correct definition of level of a working liquid after end of maintenance service or repair of the helmsman гидроусилитепя it is necessary to remove air from hydrosystem.

PERFORMANCE ORDER
1. Completely to turn operated wheels to the left and to add a working liquid in a tank to a label "COLD".
2. To start the Engine and to deduce it on the raised frequency of idling. To check up level of a working liquid. If necessary to add a liquid and to finish its level to a label "COLD".
3. To pump over hydrosystem, turning operated wheels from one extreme position in another and without supposing rigid blows in terminators. Thus it is necessary to support level of a liquid above a soaking up highway of the pump or on a label "COLD". The working liquid containing air, has an easy zheltovato-brown or reddish shade. Air removal is necessary for normal work of the steering hydraulic booster.
4. To return operated wheels in neutral position. After that to allow to work to the engine even 2–3 minutes.
5. To check up work of the steering hydraulic booster on the move the car. Normal work of the hydraulic booster should not сопровож be given by noise.
6. Repeatedly to check up level of a working liquid as it is described in operations 1 and 2. To be convinced that after warming up and stabilisation of temperature of a working liquid its level corresponds neatly "NOTES".